Scalance Xb-200/X-200/X-300/X-400 "Loop Detection; Network Connections" Windows Dialog Box - Siemens SIMATIC PCS 7 Service Manual

Overview
Information on
Status redundancy
manager
8.18.3.4

SCALANCE XB-200/X-200/X-300/X-400 "Loop detection"

Calling
Called via Web Based Management.
Overview
Information on
Loop detection
8.18.3.5

"Network Connections" Windows dialog box

Overview
Information on
Status of network
cards on Industri‐
al Ethernet
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA
Detailed information
The observer function
provides
error diagnostics and
error protection for ring
structures (ring redun‐
dancy in plant bus/termi‐
nal bus)
Detailed information
The "Loop detection" function
allows you to specify the
ports for which loop detection
should be enabled.
Detailed information
Dynamic display of the status
of physical and virtual net‐
work adapters
Called via
Enter the following in
the "Run" dialog of the
Start menu: "cmd"
In the DOS window,
enter TELNET . Addi‐
tional information in the
SIMAT‐
documentation
IC NET; Industrial
Ethernet SwitchesSCA‐
LANCE X‑300 / X‑400
Called via
Web Based Management
Called via
In the Start menu via the
Network Connections
Diagnostics in PCS 7
8.18 Diagnostic tools
Additional information
SIMAT‐
Documentation
IC NET; Industrial Ether‐
net Switches
SCALANCE X‑300 /
X‑400
Additional information
"Industrial Ethernet switches
SCALANCE X-200" Configu‐
ration Manual
"Industrial Ethernet Switches
SCALANCE X-300 / X-400"
Configuration Manual
"Industrial Ethernet switches
SCALANCE XB-200" Web
Based Management
Additional information
Online help of the oper‐
ating system
117