Status Indication - Hirschmann OWL LTE M12 User Manual

3.5.4

Status Indication

There are the following LED indicators on the front panel:
Caption Color
Power Green
a
WAN Yellow
DAT Red
USR Yellow
SIM Yellow
Green
IN0 Green
IN1 Green
OUT0 Yellow
OUT1
Table 4: Router Status Indication
a. The WAN status is updated every 10 seconds. The WAN LED displays the current status.
Installation OWL LTE M12
Release 04 06/2017
State Description
On Router is ready
Blinking Starting of the router
Fast blinking Updating firmware
1x flash per sec. Signal strength is from -50 dBm to -69 dBm
2x flash per sec. Signal strength is from -70 dBm to -89 dBm or
difference between neighbors cells is exactly 3 dBm
3x flash per sec. Signal strength is from -90 dBm to -113 dBm or
difference between neighbors cells is smaller than 3
dBm
Blinking Communication in progress on radio channel
— Function of this LED diode can be selected by user
On (Yellow color) SIM card 1 is active
On (Green color) SIM card 2 is active
On Binary input no. 0 is active
On Binary input no. 1 is active
On Binary output is active
19