Configuring The Redundant Coupling; Stand-By Switch - Hirschmann PowerMICE User Manual

Redundant coupling
4.2 Configuring the Redundant
Coupling
4.2.1

STAND-BY Switch

The Switches have a STAND-BY switch for selecting between the main cou-
pling and the redundant coupling. Depending on the Switch, this switch is a
DIP switch or a software switch (Redundancy:Ring/Network Coupling
dialog), or you can use a switch to select one of the two options.
Switch
RS2-../..
RS2-16M
RS20/RS30/RS40
MICE/PowerMICE
MS 20/MS 30
MACH 1000
MACH 3000/MACH 4000 Software switch
Table 9: STAND-BY switches of the Switches
Redundancy L3P
Release 3.0 01/07

4.2 Configuring the Redundant Coupling

STAND-BY switch
DIP switch
DIP switch
DIP switch
Can be switched between DIP switch and software switch
Can be switched between DIP switch and software switch
Software switch
53