Cylinder Head Installation - Honda C8R600F4 Service Manual

Install the tappet hole protector into the valve lifter
bore.
TOOL:
Tappet hole protector 07HMG-MR70002
Grease the cotters
Install the valve spring cotters using the valve
to ease installa-
spring compressor.
tlon.
TOOLS:
Valve spring compressor
Compressor attachment
CAUTION:
07757-0010000
07959-KM30101
To prevent loss of tension, do not compress the
valve springs more than necessary to install the
cotters.
Support the cylinder head so that the valve heads
will not contact anything that cause damage.
Tap the valve stems gently with two plastic
hammers as shown to seat the cotters firmly.
Install and tighten the spark plugs.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
CYLINDER HEAD INSTALLATION
Install the dowel pins and a new gasket.
CYLINDER HEAD/VAL VE
R-17