Honda C8R600F4 Service Manual page 271

Install the reservoir into the reservoir band by
aligning the label edge with the band and tighten
the band screw securely.
Install the fuel tank (page
2-3).
SUSPENSION LINKAGE
REMOVAL
Support the motorcycle securely with a hoist or
equivalent.
Remove the following:
-shock absorber lower mounting nut and bolt
-shock arm-to-swing arm nut and bolt
-shock arm-to-shock link nut and bolt
-shock arm plates
-shock link-to-bracket nut and bolt
-shock link.
NOTE:
If the shock link can not be removed, loosen the
shock link bracket nuts to get the clearance be-
tween the shock link and brackets (page 7-5).
INSPECTION
Remove the pivot collars.
Check the needle bearings, pivot collars and dust
seals for wear or damage.
Check the shock arm plates for deformation or
damage.
SHOCK LINK PIVOT BEARING
REPLACEMENT
Remove the dust seals.
REAR WHEEL/SUSPENSION
14-11