Honda C8R600F4 Service Manual page 206

CRANKCASE/TRANSMISSION
Turri lite I.Jail 1Jearir11:1 uuler rat.;t: wil11 yuur fi111:1er.
The bearing should turn smoothly and quietly.
Also check that the bearing inner race fits tightly on
the shaft.
Replace the bearing if the outer race does not turn
smoothly, quietly, or if the inner race fits loosely on
the shaft.
NOTE:
The countershaft ball bearing cannot be replaced. If
the countershaft bearing is faulty, replace the coun-
tershaft.
MAINSHAFT BEARING
REPLACEMENT
Press the mainshaft out of the bearing.
Install with the
Press a new bearing onto the mainshaft with the
groove side facing
special tools.
up.
TOOL:
Inner driver C 077'16-0030100
Attachment, 25 mm 1.0. 077 46-0030200
11-8