Honda C8R600F4 Service Manual page 135

Install the fan motor assembly onto the radiator
and tighten the mounting bolts with the ground
terminal.
Connect the fan motor switch connector.
Install the air guide rubber over the radiator stays
properly.
lnst::ill the mounting collar into the right side of the
left grommet.
Install the radiator (page 6-8).
RADIATOR RESERVE TANK
REMOVAL/INSTALLATION
Drain the coolant from the reserve tank (p::ioe 6-5)_
Remove the breather tube from the reserve tank
stay.
Remove the mounting bolt, and the reserve tank
and heat guard rubber from the stay.
Align the locating
Installation is in the reverse order of removal.
pin with the hole in
the stay.
NOTE:
noute the tubes properly (page 1-18).
Fill the reserve tank with recommended coolant to
the upper level line (page 3-14).
COOLING SYSTEM
RESERVE TANK RUBBER
6-11