Remove the snap ring using the special tool.
TOOL:
Snap ring pliers
07914-SA50001
Remove the master piston, cup and spring from the
master cylinder.
Clean the master cylinder and master piston with
clean brake fluid.
INSPECTION
Check the cups for wear, deterioration or damage.
Check the spring for damage.
Check the master cylinder and piston for scoring,
scratches or damage.
Measure the master cylinder
1.0.
SERVICE LIMIT:
15_9?5 mm (0_6?70 in)
Measure the master piston
0.0.
SERVICE LIMIT:
15.815 mm (0.6226 in)
HYDRAULIC BRAKE
SN'7-P RING
15-9