Honda C8R600F4 Service Manual page 146

ENGINE REMOVAL/INSTALLATION
Install the four dowel pins Imo the bracket bolt
holes in the engine.
Install the link brackets onto the engine and set the
shock link between the brackets.
Carefully align the
Install the bracket bolts and shock link-to-bracket
bolt holes in the
bolt from the left side.
brs.okots snd
shock link.
Install the bracket and shock link-to-bracket nuts.
Tighten the bracket nuts, then the shock link-to-
bracket nut.
TORQUE:
Bracket nut:
39 N·m (4.0 kgf.m , 29 I bf.ft)
Shock link-to-bracket: 44 N·m (4.5 kgf.m, 33 I bf.ft)
Install with the
Install the drive sprocket with the drive chain onto
sprocket's mark
the countershaft.
7-8
facing out.
Install the washer and bolt, and tighten the bolt.
TORQUE : 64 N-m (6.6 kgfm, 40 lbfft)
Install the drive sprocket cover with the guide plate
and tighten the two bolts.
GUIDE PLATE AND COVER