Honda C8R600F4 Service Manual page 233

FRONT WHEEL/SUSPENSION/STEERING
LEFT HANDLEBAR REMOVAL
Disconnect the clutch switch connectors.
Remove the two bolts, holder and clutch lever
bracket from the handlebar.
Remove the two screws and left handlebar switch
housing. Disconnect the choke cable from the
choke lever.
Hold the handlebar weight and remove the mount-
ing screw and weight.
Remove the left handlebar grip and choke lever
from the handlebar.
Loosen the pinch bolt.
Remove the stopper ring and the handlebar from
the fork.
LEFT HANDLEBAR INSTALLATION
Install the handlebar onto the fork, aligning its boss
with the groove in the fork top bridge.
Install the stopper ring and tighten the handlebar
pinch bolt.
Clean the inside surface of the left handlebar grip
and the outside surface of the left handlebar.
Apply Honda Bond A or equivalent to the inside
surface of the left handlebar grip and to the outside
surface of the left handlebar. Wait 3-5 minutes
and install the choke lever and the grip.
Rotate the grip for even application of the adhesive.
NOTE:
Allow the adhesive to dry for an hour before using.
CLUTCH LEVER BRACKET
HANDLEBAR PINCH BOLT
\
13-5