Honda C8R600F4 Service Manual page 184

CLUTCH/GEARSHIFT LINKAGE
Make sure that the primary driven gear of the
clutch outer is flush with the primary drive sub-
gear.
Release the cam chain tensioner lifter (page 8-21 ).
Install the thrust washer.
Install the clutch center.
Install the plain washer and special washer with the
"OU I"
mark on the special washer tacing out.
Apply engine oil to the threads and seating surface
of a new clutch center lock nut and install it onto
the mainshaft.
Hold the clutch center with the special tool and
tighten the lock nut.
TOOL:
Clutch center holder
07724-0050002 or
equivalent commercially
available in U.S.A.
TORQUE: 127 N·m (13.0 kgf·m, 94 lbf·ftl
Be careful not to
Stake the clutch center lock nut into the mainshaft
damage the groove.
mainshaft threads.