Honda C8R600F4 Service Manual page 231

FRONT WHEEL/SUSPENSION/STEERING
HANDLEBAR
RIGHT HANDLEBAR REMOVAL
Hold the handlebar weight and remove the
mounting screw and the weight.
Disconnect the front brake light switch connectors.
NOTE;
Keep the brake master cylinder upright to prevent
air from entering the hydraulic system.
Remove the two bolts, holder and master cylinder
from the handlebar.
Remove the two screws and handlebar switch/
throttle housing.
Loosen the pinch bolt.
Remove the stopper ring and the handlebar from
the fork.
Remove the throttle grip pipe from the handlebar.
RIGHT HANDLEBAR INSTALLATION
Apply grease to the throttle grip pipe flange and in-
stall the throttle grip pipe onto the right handlebar.
13-3