Honda C8R600F4 Service Manual page 129

REPLACEMENT
I
AIR BLEEDING
fWkh!WIM
Tfn:f e119ine must be i:;ool before :;.ervii:;ing the i:;ool·
ing system, or severe scalding may result.
NOTF·
When filling the system or reserve tank with a cool-
ant (checking the coolant level), place the motorcy-
cle upright on a flat, level surface.
Remove the right air intake duct (page 2-6).
Remove the left side fairing (page 2-4>.
Remove the radiator cap.
Remove the drain bolt on the water pump and drain
the coolant from the system.
Remove the radiator without disconnecting the
water hoses (page
3-6).
Remove the drain bolt on the cylinder and drain the
coolant from the cylinder.
Remove the reseve tank cap.
Slide the heat guard rubber out of the way, discon-
nect the siphon tube, and drain the coolant from
the reserve
tank.
Connect the siphon tube and install the drain bolts
with new sealing washers.
Install the radiator onto the frame (page 3-7).
COOLING SYSTEM
DRAIN BOLT
SIPHON TUBE
6-5