Honda C8R600F4 Service Manual page 202

CRANKCASE/TRANSMISSION
Place the engine with the upper side down.
Loosen the eight 6 mm bolts, ten 8 mm bolts and 10
mm bolt in a crisscross pattern in 2 or 3 steps.
Remove the bolts.
Separate the lower crankcase from the upper crank·
case.
Remove the dowel pins and oil orifices.
Clean any sealant from the crankcase mating sur-
faces.
SHIFT FORK/SHIFT DRUM
REMOVAL
:'.Jeparate the crankcaae halvea (page 11-3).
Remove the bearing set bolts.
Remove the shift fork shaft and shift forks.
Remove the shift drum and bearing.
11-4