Honda C8R600F4 Service Manual page 302

HYDRAULIC BRAKE
ASSEMBLY
PAD SPRING
· .. w.
BLEED VALVE
cf)))!.
~~
CALIPER PIN BOLT
C':o;:it nP.W f)iStOn and dust SP.a ls with clP.an hrBkA fl11.
id and install them in the seal grooves in the caliper.
Coat the caliper piston with clean brake fluid and in-
stall it into the caliper cylinder with the opening to-
wan.J
lt11:1
µalh:i.
Install the pad spring onto the caliper body as
shown.
Check the caliper boot and replace it if it is hard, de-
teriorated or damaged.
Apply silicone grease to the inside of the boot.
Install the boot and collar into the caliper.
CALIPER PISTON