Frame/Body Panels/Exhaust System - Honda C8R600F4 Service Manual

2. FRAME/BODY PANELS/EXHAUST SYSTEM
SERVICE INFORMATION
TROUBLESHOOTING
SEAT
SEAT COWL
FUEL TANK
SIDE FAIRING
SERVICE INFORMATION
GENERAL
2-1
FRONT INNER FAIRING
2-1
FRONT FAIRING
2-2
WINDSHIELD
2-2
DIRECT AIR INTAKE DUCT
2-3 EXHAUST SYSTEM
2-4 REAR FENDER/SEAT RAIL
• Gasoline is extremely flammable and is explosive under certain conditions. KEEP OUT OF REACH OF CHILDREN.
2-4
2-5
2-6
2-6
2-7
2-8
• Serious burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
•Work in a well ventilated area. Smoking or allowing flames or sparks in the work area or where gasoline is stored can
cause a fire or explosion.
•This section covers removal and installation of the body panels, fuel tank and exhaust system.
•Always replace the exhaust pipe gasket when removing the exhaust pipe from the engine.
•Always inspect the exhaust system for leaks after inslallaliun.
TORQUE VALUES
Exhaust pipe joint nut
Muffler band bolt
Seat cowl screw
Front inner fairing screw
Front fairing-to-side fairing bolt
Passenger footpeg bracket bolt
Seat rail mounting bolt
TROUBLESHOOTING
ExcAssive exhaust noisA
• Broken exhaust system
• Exhaust gas leaks
Poor performance
• Deformed exhaust system
• Exhaust gas leaks
•Clogged muffler
12 N·m (1.2 kgf.m, 9 lbf.ft)
23 N·m (2.3 kgf·m, 17 lbf·ft)
2 N·m (0.2 kgf.m, 1.4 lbf.ft)
2 N-m (0.2 kgf-m, 1.4 lbf-ft)
2 N·m (0.2 kgf·m, 1.4 lbf·ft)
26 N·m (2.7 kgf.m, 20 !bf.ft)
49 N·m (5.0 kgf·m, 36 lbf·ft)
Ill
2-1