Honda C8R600F4 Service Manual page 69

REBOUND DAMPING
Turn the rebound damping adjuster counterclock-
wise to reduce the rebound damping force, and
turn it clockwise to increase the rebound damping
force.
To set the standard position, turn the adjuster clock-
wise until it stops, then turn it counterclockwise ap-
prox. 1 turn. Align the punch mark on the adjuster
with the reference mark.
COMPRESSION DAMPING
Turn the compression damping adjuster counter-
clockwise to reduce the compression damping
force, and turn it clockwise to increase the compres-
sion damping force.
To set the standard position, turn the adjuster clock-
wise until it stops, then turn it counterclockwise ap-
prox. 1-1/2 turn. Align the punch marks.
REAR SUSPENSION INSPECTION
Check the action of the shock absorber by com-
pressing it several times.
Chi::ck the entire shock absorber assembly for signs
of leaks, damage or loose fasteners.
Replace damaged components which cannot be
repaired.
Tighten all nuts and bolts.
Refer to section 14 for shock absorber service.
Raise the rear wheel off the ground and support the
motorcycle securely.
Check for worn swingarm bearings by grabbing the
rear wheel and attempting to move the wheel side
to side.
Replace the bearings if any looseness is noted
(section 14).
MAINTENANCE
3-25