Honda C8R600F4 Service Manual page 278

REAR WHEEL/SUSPENSION
1JL10
5. Insert the other pivot bolt from the right side
gradually pushing the left side pivot bolt out from
the left side.
6. Tighten the left adjusting bolt.
TORQUE:
12 N·m (1.2 kgf.m, 9 lbf·ft)
Loosen the left adjusting bolt and retighten it to
the specified torque.
TORQUE : 7 N-m (0.7 kgf-m, 5.1 !bf.ft)
7. Install the left lock nut.
Hold the left adjusting bolt and tighten the left
lock nut.
TOOL:
Lock nut wrench
07908-4690003 or
07908-4690002
TORQUE: Actual: 64 N·m (6.5 kgf.m, 47 lbf-ft)
Indicated: 58 N·m (5.9 kgf·m , 43 lbf·ft)
8. Push in the pivot bolt until it is seated.
Install the pivot nut with the washer and tighten it.
TORQUE : 93 N-m (9.5 kgf-m, 69 I bf.ft)