Brake Pad/Disc - Honda C8R600F4 Service Manual

BRAKE PAD/DISC
FRONT BRAKE PAD REPLACEMENT
Always replace
Loosen the pad pins.
the brake pads in
Remove the bolts and brake caliper.
pairs to ensure
even disc pres·
sure.
Push the caliper pistons all the way in to allow in-
stallation of new brake pads.
NOTE:
Check the brake fluid level in the brake reservoir as
this operation causes the level to rise.
Remove the pad pins while pushing in the pad
spring, then remove the pad spring and brake pads.
Install new brake pads and the pad spring with the
arrow focing up.
Install the pad pin while pushing in the pad spring.
Install the front brake caliper so the disc is posi-
tioned between the pads, being careful not to dam-
aQe the pads.
Install and tighten new mounting bolts.
TORQUE : 30 N·m (3.1 kgf·m, 22 I bf.ft)
Tighten the pad pins.
TORQUE: 18 N-m (1.8 kgf.m, 13 lbf.ft)
Operate the brake lever to seat the caliper pistons
against the pads.
HYDRAULIC BRAKE
15-5