Honda C8R600F4 Service Manual page 63

Remove the excess drive chain links from the new
drive chain with the drive chain tool set.
NOTE:
Include the master link when you count the drive
chain links.
SPECIFIED LINKS: 110 links
REPLACEMENT CHAIN: DID 525HV
RK 525ROZ1
Remove the drive sprocket cover (page 7-4).
Install the new drive chain on the sprockets over
the drive and driven sprockets.
Assemble the new master link, 0-rings and master
link plate with the drive chain tool set.
NOTE:
Insert the master link from the inside of the drive
chain, and install the plate with the identification
mark facing the outside.
Measure the master link pin length projected from
the plate.
SPECIFIED LENGTH:
DID:
1.15-1.55 mm (0.045-0.061 in)
RK: 1.20-1.40 mm (0.047-0.055 in)
Stake the master link pins with the drive chain tool
set.
Make sure that the maser link pins are staked prop-
erly by measuring the diameter of the staked area.
DIAMETER OF THE STAKED AREA:
DID:
5.50-5.80 mm (0.217 -0.228 in)
RK: 5.55-5.85 mm (0.219-0.230 in)
MAINTENANCE
1 LINK MASTER LINK
SPECIFIED LINKS
:=:....
~,.,
0-RINGS
fllllijjilll
DRIVE CHAIN CUTIER
MASTER LINK
DRIVE CHAIN CUTIER
VERNIER CALIPERS
3-1~