Honda C8R600F4 Service Manual page 78

LUBRICATION SYSTEM
l11:;lall
l11t;
uil µa11 a11u liytlltHI ltie eleven tJult:; in a
crisscross pattern in 2 or 3 steps.
Route the tube
Install the breather tube into the stay.
properly (page
1-18).
Install the exhaust pipe and muffler (page
2-7).
OIL PUMP
4-6
Fill the crankcase with recommended engine oil
(page
3-12).
REMOVAL
Remove the clutch and oil pump driven sprocket
(page 9-3).
Remove the three mounting bolts and oil pump.
DISASSEMBLY
Remove the following:
-dowel pins
- tJull allU
IJUlllµ L:UVt::lf
-pump shaft
-thrust washer
-drive pin
- inner and outer rotors.
Clean the disassembled parts thoroughly.