Honda C8R600F4 Service Manual page 245

FRONT WHEEL/SUSPENSION/STEERING
ASSEMBLY
Before assembly, wash all parts with a high flash
point or non-flammable solvent and wipe them off
completely.
DUST SEAL~ ~.
~/
OIL
SEAL~~
GUIDE BUSHING _________ ~~STOPPER
~RING
BACK-UP
FORK PROTECTOR RING
FORK SLIDER ....._
o
0-RING
W
SLIDER
BUSHING
SEALING
WA?.' \
I'?~ {_~
0-RING r---'i
""-~ ~
FORK CAP
LO-RING
~JOINTPLATE
{):---JOINT COLLAR
~SPRING
SEAT
FORK SPRING
SOCKET BOLT OIL LOCK PIECE FORK DAMPER
Install a new slider bushing if it has been removed.
CAUTION:
• Be careful not to damage the coating of the
bushing.
• Do not open the bushing more than necessary.
NOTE:
Remove the burrs from the bushing mating surface,
being careful not to peel off the coating.
Coat new 0-ring with fork tluld and install It into the
groove in the oil lock piece.
Install the oil lock piece into the fork tube.
Install the fork tube into the fork slider.
Install the fork damper into the fork tube.
FORK DAMPER
\
13-17