Honda C8R600F4 Service Manual page 77

OIL PRESSURE RELIEF VALVE
Remove the oil pressure relief valve from the crank-
case.
Remove the 0-ring trom the relief valve body.
Remove the snap ring.
~emove
the spring seat, spring and piston from the
valve body.
Check the piston for wear, sticking or other damage.
Check the spring for fatigue or damage.
Install the piston, spring and spring seat and secure
them with the snap ring.
Coat a new 0-ring with oil and install it into the re-
lief valve body groove.
Install the relief valve into the crankcase.
OIL PAN INSTALLATION
Clean the oil pan mating surfaces thorouqhlv, be-
ing careful not damage them.
Apply sealant to the oil pan mating surface.
LUBRICATION SYSTEM
4-5