Honda C8R600F4 Service Manual page 347

Check for continuity between the connector termi-
nals in each switch position.
Continuity should exist between the color coded
wires as follows:
Color
R
R/BI Bu/0
Position
ON
OFF
LOCK
REMOVAL/INSTALLATION
Disconnect the ignition switch 4P (white) connec-
tor (page 19-12).
Remove the two mounting bolts (T40) and the ig-
nition switch.
Install the ignition switch and tighten the mount-
ing bolts.
TORQUE: 25 N·m (2.5 kgf·m, 18 lbf.ft)
Install the removed parts in the reverse order.
HANDLEBAR SWITCHS
Remove the left air intake duct (page 2-6).
Disconnect the right handlebar switch 3P and 4P
(Red) connectors and left handlebar switch 13P
connector.
Check for continuity between the connector termi-
nals in each switch position.
Continuity should exist between the color coded
wires as follows:
ENGINE STOP SWITCH
Color
Bl/Y Bl/W
rosition
OFF
RUN
STARTER SWITCH
Color
I
I
I
Y/R
Position
FREE
PUSH
Bl/W 81/R Bu/W
o-+-c)
LIGHTS/METERS/SWITCHES
19-13