Honda C8R600F4 Service Manual page 255

FRONT WHEEL/SUSPENSION/STEERING
Install a new upper bearing outer race and the spe-
cial tools as shown.
While holding the installer shaft with the wrench,
turn the lower nut gradually until the groove in
installer attachment
A
aligns with the upper end of
the steering head. This will allow you to install the
upper bearing outer race.
Install a new lower bearing outer race and the spe-
cial tools as shown.
While holding the installer shaft with the wrench,
turn the upper nut gradually until the groove in
installer attachment B aligns with tho lower end of
the steering head. This will allow you to install the
lower bearing outer race.
UPPERNUT~-----n
INSTALLER
ATTACHMENT A..---
UPPER BEARING
OUTER RACE
INSTALLER SHAFT--_/---;--i
INSTALLER
ATTACHMENTB--~~·d.1
OIL SEAL DRIVER
FORK SEAL
URIVER WEIGHT _ _ _..,..
MAIN BEARING
DRIVER ATTACHMENT
UPPER NUT
MAIN BEARING
DRIVER ATTACHMENT
FORK SEAL
DRIVER WEIGHT · · - - -
INSTALLER SHAFT
LOWER BEARING
OUTER RACE
INSTALLER
ATTACHMENT B
LOWER NUT
13-27