RIGHT CRANKCASE COVER REMOVAL
Drain the engine oil (page 3-12).
Remove the right side fairing (page 2-4).
Raise the fuel tank and support it (page 2-3).
Remove the cable holder bolt and clutch cable hold-
er, and disconnect the clutch cable from the clutch
lifter arm.
Disconnect the ignition pulse generator 2P connec-
tor.
Remove the crankcase cover bolts.
The lifter arm
Remove the crankcase cover while turning the
spindle is engaged
clutch lifter arm counterclockwise to disengage the
with the clutch
lifter arm spindle from the lifter piece.
lifter piece inside
the right
crankcase cover.
Remove the four dowel pins.
Clean any sealant from the crankcase cover mating
surfaces.
CLUTCH/GEARSHIFT LINKAGE
9-3