Honda C8R600F4 Service Manual page 188

CLUTCH/GEARSHIFT LINKAGE
Install the gearshift arm onto the spindle, aligning
the slit of the arm with the punch mark on the
spindle.
Tighten the pinch bolt securely.
Assemble the clutch (page 9-9).
RIGHT CRANKCASE COVER
INSTALLATION
9-14
Install the four dowel pins.
Apply sealant to the crankcase mating surfaces as
shown.
-''@firu
10-15 mm
(0.4-0.6 in)
10-15mm
(0.4-0.6 in)
Apply sealant to the right crankcase cover mating
surface.
Install the right crankcase cover while turning the
lifter arm clockwise to engage the lifter arm groove
with the lifter piece flange.