Honda C8R600F4 Service Manual page 204

CRANKCASE/TRANSMISSION
The :;tiift furk:; have the following identification
marks:
RL: right and left shift forks
C: center shift fork
Install the shift forks into the shift drum guide
groove with the identification marks facing-toward
the right side of the engine and insert the fork shaft.
Apply locking agent to the bearing set bolt threads.
Install the set bolts and tighten them.
TORQUE: 12 N·m (1.2 kgf·m
1
9 lbf·ft)
Assemble the crankcase halves (page 11-11).
TRANSMISSION
DISASSEMBLY
11-6
Separate the crankcase halves (page 11-3).
Remove the mainshaft and countershaft assem-
blies.
Disassemble the mainshaft and countershaft.
Clean all disassembled parts in solvent thoroughly.
Check the mainshaft and countershaft needle bear-
ings for abnormal wear or damage.