Honda C8R600F4 Service Manual page 253

FRONT WHEEL/SUSPENSION/STEERING
Install a new upper bearing outer race and the ball
race remover as shown.
While holding the driver shaft, turn nut A gradually
until the groove in driver attachment A aligns with
the upper end of the steering head. This will allow
you to install the upper bearing outer race.
Install a new lower bearing outer race and the ball
race remover as shown.
While holding the driver shaft, turn nut A gradually
unit the groove in driver attachment B aligns with
thP. lowP.r P.nd of the steering head. This will allow
you to install the lower bearing outer race.
ATTACHMENT A
BASE
NUTA
SHAFT---__,
ATTACHMENT B
ATTACHMENT B
NUTA
BASE
/
13-25