Honda C8R600F4 Service Manual page 311

REGULATOR/RECTIFIER
WIRE HARNESS INSPECTION
Remove the seat cowl (page 2-2).
Disconnect the regulator/rectifier 5P (black) connec-
tor.
Check the connector for loose contacts or corroded
terminals.
BATTERY LINE
Measure the voltage between the red/white wire ter-
minal and ground.
There should be battery voltage at all times.
GROUND LINE
Check the continuity between the green wire termi-
nal and ground.
There should be continuity at all times.
CHARGING COIL LINE
Measure tho rcsistonoo between tho yellow wire tor
minals.
STANDARD: 0.1 1.0 Q (20 °C/68 °F)
Check for continuity between each yellow wire ter-
minal and ground.
There should not be r.nntinuity
CHARGING SYSTEM
1F\-7