Honda C8R600F4 Service Manual page 294

HYDRAULIC BRAKE
Check the master cylinder and piston for si;ur ir ll:J ur
damage.
Measure the master cylinder l.D.
SERVICE LIMIT: 14.055 mm (0.5533 in)
Measure the master piston O.D.
SERVICE LIMIT: 13.945 mm (0.5490 in)
ASSEMBLY
MASTER CYLINDER
15-14
SPRING~
CUP~
MASTER
PISTON----~
~AP
RING
BOOT~
Coat the master piston and piston cups with clean
brake fluid.
Install the spring, cup and master piston into the
master cylinder.
CAUTION:
Do not allow the piston cup lips to turn inside out.
Apply silicone grease to the push rod contacting
area of the master piston.
PUSH ROD
~
~
~
PUSH ROD JOINT