Honda C8R600F4 Service Manual page 42

FRAME/BODY PANELS/EXHAUST SYSTEM
WINDSHIELD
Remove the rearview mirrors (page
2-5).
Remove the following:
-two screws and nuts
-·four screws with rubber and plastic washers
-windohicld
Align the groove in
Installation is in the reverse order of removal.
the windshield
with the lug on the NOTE:
front fairing. - - - - - - - - - - - - - - - - - -
Be careful not to scratch the shield surface.
DIRECT AIR INTAKE DUCT
2-6
Remove the duct cover (page 2-3).
Remove the instrument panel (page 2-5).
Loosen the connecting tube band screw.
Right duct:
Remove the outer air vent hose (California: No.
8)
from the duct by releasing the hose clip.
Left duct:
Remove the wire harness from the duct.
Remove the air intake duct from the air duct grill of
the front fairing and the front fairing stay.
Installation is in the reverse order of removal.
WINDSHIELD
TWO SCREWS AND NUTS
AIR
DUCT
GRILL