Evaporative Emission Control System; Drive Chain - Honda C8R600F4 Service Manual

MAINTENANCE
EVAPORATIVE EMISSION CONTROL
SYSTEM (California type only)
Check the evaporative emission (EVAP) canister for
cracks or damage.
Check the tubes between the fuel tank, EVAP canis-
ter, EVAP purge control valve, EVAP carburetor air
vent (CAV) solenoid valve and carburetors for dete-
rioration, damage or loose connections. Also check
that the tubes are not kinked or pinched.
Refer to the Vacuum Hose Routing Diagram Label
and Cable & Harness Routing (page 1-18) for tube
connections and routing.
DRIVE CHAIN
3-16
CHAIN SLACK INSPECTION
Never inspect and adjust the drive chain while the
engine is running.
Turn tho ignition owitch OFF, ploco the motorcycle
on its side stand and shift the transmission into neu-
tral.
Check the slack in the drive chain lower run mid-
way between the sprockets.
CHAIN SLACK:25·--35
mm
(1 1 3/8
inl
EVAP CAV SOLENOID VALVE
EVAP PURGE
CONTROL VALVE
EVAP CANISTER
25--35
mm
(1 1 3/8 in)