Carburetor Installation - Honda C8R600F4 Service Manual

FUEL SYSTEM
Install the carburetor insulators with the "CARB"
mark facing the carburetor and the band screw
heads facing the outside as shown.
Align each insulator groove with each carburetor
lug to seat the insulators securely.
Align the band hole with the insulator boss.
Tighten each band screw until the clearance be-
tween the band ends is
11
13 mm (0.4-0.5 in).
CARBURETOR INSTALLATION
c ".ln
NOTE:
Route the tubes and cables properly (page 1-18).
Connect the water tubes to the carburetor.
Connect the throttle cables to the throttle drum and
install them into the cable holder.
Connect the throttle sensor connector.