Honda C8R600F4 Service Manual page 230

FRONT WHEEL/SUSPENSION/STEERING
TOOLS
Bearing remover shaft
Bearing remover head, 20 mm
Driver
Attachment, 42
x
47 mm
Pilot, 20 mm
Fork seal driver weight
07746-0050100
077 46-0050600
07749-0010000
07746-0010300
077 46-0040500
07947-KJ\60100
or equivalent commercially available in U.S.A.
Fork seal driver attachment, 43 mm
t.
D.
Steering stem socket
07947-KA40200
07916-3710101or07916-3710100
Ball race remover set 07946-KM90001 - not available in U.S.A.
---Driver attachment A
- Driver attachment B
- Driver shaft assembly
Bearing remover A
Bearing remover B
-Assembly base
07946-KM90100
07946-KM90200
07946-KM90300
07946-KM90401--
07946-KM90500
07946-KM90600
Main bearing driver attachment
Fork seal driver weight
07946-ME90200 U.S.A. only
Oil seal driver
Installer shaft
Installer attachment A
Installer attachment B
Remover attachment A
Remover attachment B
Steering stem driver
TROUBLESHOOTING
Hard steering
07947-KA50100
07965-MA60000
07VMF-KZ30200
07VMF-MATO 100
07VMF-MAT0200
07VMF-MAT0300
07VMF-MAT0400
07946-MBOOOOO
•Steering bearing adjustment nut too tight
•Worn or damaQed steering head bearings
• Bent steering stem
• Insufficient tire pressure
Steers one side or does not trook straight
• Damaged or loose steering head bearings
•Bent forks
•Bent axle
•Wheel installed incorrectly
•Bent frame
•Worn or damaged wheel bearings
•Worn or damaged swinoarm pivot bearings
Front wheel wobbling
•Bent rim
•Worn or damaged front wheel bearings
• Faulty front tire
•Unbalanced front tire and wheel
13-2
Front wheel turns hard
• Faulty front wheel bearings
• Bent front axle
• Front brake drag
Soft suspension
'" Insufficient fluid in fork
•Incorrect fork fluid weight
•Weak fork springs
• Insufficient tire pressure
Hard suspension
• Bent fork tubes
•Too much fluid in fork
•Incorrect fork fluid weight
•Clogged fork fluid passage
Front suspension noise
•Insufficient fluid in fork
• Loose fork fasteners