Cylinder Head Disassembly - Honda C8R600F4 Service Manual

CYLINDER HEAD/VALVE
-two bolts, washers and cam chain tensioner lifter.
Remove the two 6 mm cylinder head bolts.
Loosen the ten 9 mm cylinder head bolts in a criss-
cross pattern in 2 or 3 steps, and remove them.
Remove the cylinder head.
Rcmovo tho gockct and dowel pine.
CYLINDER HEAD DISASSEMBLY
Remove the spark plugs from the cylinder head.
Install the tappet hole protector into the valve lifter
bore.
TOOL:
Tappet hole protector 07HMG-MR70002
DOWEL PINS