Slt Mw Mode - Panasonic kx-ns500 Pc Programming Manual

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Value Range
0–15 s
Feature Guide References
2.19.1 Caller ID

SLT MW Mode

Enables the use of the Message Waiting Lamp on an SLT extension connected to the extension port.
Value Range
Disable, MW-Lamp
Feature Guide References
2.20.1 Message Waiting
Wrap-up Timer
Specifies the length of time that must pass after completing a call before an extension will accept another call
when logged in as a member of an Incoming Call Distribution Group.
This timer is used when "
Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous.
Value Range
0–3000 s
PC Programming Manual References
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List— Wrap-up Timer
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—
Options—Wrap-up Timer based on
Feature Guide References
2.2.2.8 Log-in/Log-out
Option 9
Extension Number
Specifies the extension number of the extension.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Name
Specifies the name of the extension.
576 PC Programming Manual
Options—Wrap-up Timer based on" is set to "Extension" in 11.5.3 PBX