Panasonic kx-ns500 Pc Programming Manual page 715

Value Range
DIL: Distribution depends on the trunk through which the calls arrive
DDI/DID: Distribution depends on the DDI/DID number of the calls
MSN: Distribution depends on the MSN of the calls
Feature Guide References
2.1.1.1 Incoming Trunk Call Features—SUMMARY
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
DDI/DID/TIE/MSN—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DDI/DID distribution
or for TIE line service.
Value Range
0–15
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
4.3.1 TIE Line Service
DDI/DID/TIE/MSN—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for DDI/
DID distribution or for TIE line service.
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
4.3.1 TIE Line Service
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
PC Programming Manual 715