Panasonic kx-ns500 Pc Programming Manual page 403

DISA—CO-to-CO Call Prolong Time (x60s)
Specifies the length of time that a trunk-to-trunk call on a DISA line is prolonged each time that the caller
prolongs the call. (Selecting "0" prevents the caller from prolonging the trunk-to-trunk call.)
Value Range
60 ´ n (n = 0–7) s
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA—Progress Tone Continuation Time before Recording Message (s)
Specifies the length of time that a progress tone is sent to the manager extension before recording an OGM.
Value Range
0–60 s
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.30.2 Outgoing Message (OGM)
DISA—Reorder Tone Duration (s)
Specifies the length of time that a reorder tone is sent to the caller before the call is disconnected. If "0" is
specified, no reorder tone is sent and the call is disconnected immediately.
Value Range
0–15 s
PC Programming Manual References
13.3.2 PBX Configuration—[5-3-2] Optional Device—Voice Message—DISA Message
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
Doorphone—Call Ring Duration (x10s)
Specifies the length of time that a call from a doorphone rings until the call is cancelled when there is no answer.
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 403