Network Service-[4-2] Other-Nas - Panasonic kx-ns500 Pc Programming Manual

27.4.2 Network Service—[4-2] Other—NAS
NAS settings can be programmed.
NAS Status
Displays/changes the connection status of the NAS.
Value Range
Connected, Disconnected
To change the connection status of the NAS, perform the following:
•
Click Disconnect to set the NAS to disconnect status.
•
Click Connect to set the NAS to connect status.
NAS Setting—Protocol
Specifies the communication protocol for the NAS connection.
Value Range
NFS, CIFS
NAS Setting—NAS Address—IP Address
Specifies the IP address of the NAS.
Value Range
1.0.0.1–223.255.255.254
NAS Setting—NAS Address—Name
Specifies the Name of the NAS.
Value Range
Max. 253 characters
NAS Setting—Port No.
Specifies the NAS using port number.
Value Range
445, 1024–65535
NAS Setting—Mount directory
Specifies the NAS mount directory.
Value Range
Max. 128 characters (multi-byte characters allowed)
27.4.2 Network Service—[4-2] Other—NAS
PC Programming Manual 873