Incoming Call - Panasonic kx-ns500 Pc Programming Manual

9.11 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW
Dial End Code
Specifies the delimiter code to be used to signal the end of a dialled number.
Value Range
0–9, #, *

Incoming Call

Voice Activity Detection for G.711
Enables the use of the Voice Activity Detection feature for the G.711 codec. This feature conserves bandwidth
by detecting silent periods during a call and suppressing the packets of silence from being sent to the network.
Value Range
Disable, Enable
Voice Codec Priority 1st
Specifies the highest priority codec type. For fax communications, it is necessary to specify G.711A or G.
711Mu for this parameter.
Value Range
G.711A, G.711Mu, G.729A
Voice Codec Priority 2nd
Specifies the second highest priority codec type.
Value Range
None, G.711A, G.711Mu, G.729A
Voice Codec Priority 3rd
Specifies the third highest priority codec type.
Value Range
None, G.711A, G.711Mu, G.729A
Packet Sampling Time for G.711A
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Packet Sampling Time for G.711Mu
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
270 PC Programming Manual