Panasonic kx-ns500 Pc Programming Manual page 645

Value Range
1–8
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.18.1 Doorphone Call
5.1.3 Tenant Service
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone ports that are
able to make trunk calls, and sets restrictions on intercom calls from certain extensions (Internal Call Block).
Value Range
1–64
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—
Lunch, Break, Night
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
Feature Guide References
2.1.2.2 Internal Call Block
2.18.1 Doorphone Call
Service Group Number
Specifies the Service Group number sent to the Unified Messaging system when the incoming call destination
is the floating extension number of a UM group.
The Service Group number is used to allow the Unified Messaging system to send the applicable greeting
message to the caller.
Value Range
None, 1–64
Feature Guide References
2.18.1 Doorphone Call
3.1.1 Unified Messaging System Overview
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the incoming call destination is the floating
extension number of a VM (DPT) Group. The VM trunk group number is used to allow the VPS to send the
applicable greeting message to the caller.
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
TRS Level—Day,
PC Programming Manual 645