Panasonic kx-ns500 Pc Programming Manual page 344

9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Fault: The port is not communicating with the network.
Feature Guide References
5.2.5.1 ISDN Extension
Ring Mode (ISDN MSN Last No. 0 or 00)
Selects the ring mode when receiving an incoming call with an MSN ending with "0" or "00". This setting is only
available when Port Type on this screen is set to Extension.
Value Range
Ring All Extension for MSN: Ring all ISDN extensions that are addressed with MSN.
Ring an Extension for MSN: Ring only one of the ISDN extensions that are addressed with MSN.
Feature Guide References
5.2.5.1 ISDN Extension
ISDN Extension Progress Tone
Enables the PBX to send call progress tones to the ISDN extension. This setting is only available when Port
Type on this screen is set to Extension.
Value Range
Disable, Enable
Feature Guide References
5.2.5.1 ISDN Extension
Network
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on another
PBX. ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
344 PC Programming Manual