Um Configuration-[4-4] Service Settings-Holiday Table - Panasonic kx-ns500 Pc Programming Manual

23.4 UM Configuration—[4-4] Service Settings—Holiday Table
23.4 UM Configuration—[4-4] Service
Settings—Holiday Table
Holidays can be set for and assigned to trunks and Unified Messaging ports. When a call is received from a
certain trunk or by a certain subscriber during the time frame set for an assigned holiday, the call handling
settings for that holiday will be used. This screen is similar to the table found in 10.5 PBX
Configuration—[2-5] System—Holiday Table. You can also access the PBX Holiday Table directly by clicking
the PBX Holiday Table tab. A maximum of 24 different holidays can be programmed.
Setting
Enables the setting of the holiday. This setting synchronises with the PBX's Holiday Table.
Value Range
Enable, Disable
PC Programming Manual References
10.5 PBX Configuration—[2-5] System—Holiday Table—
Feature Guide References
3.2.1.20 Holiday Service
Name of Holiday
Specifies the name of the holiday setting for later reference.
Value Range
Max. 32 Characters
Feature Guide References
3.2.1.20 Holiday Service
Start Date (Month Day)
Specifies the month and day of the holiday start date. Click the cell to display a calendar. Select a month using
the arrow buttons, and click on a day for the selected month. This setting synchronises with the PBX's Holiday
Table.
Value Range
Month and Day
PC Programming Manual References
10.5 PBX Configuration—[2-5] System—Holiday Table
→ Holiday Table—Start Date—Month
→ Holiday Table—Start Date—Day
816 PC Programming Manual
Holiday Table—Setting