Panasonic kx-ns500 Pc Programming Manual page 196

9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
Value Range
Disable, Enable
PC Programming Manual References
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—V-IPGW–GW Settings–Option
1— IP Codec Priority—1st, 2nd, 3rd
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Value Range
96–127
V-IPGW–GW Settings–Option 3
GW Name
Specifies the name of the destination gateway device for programming reference.
Value Range
Max. 20 characters
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Value Range
272–512
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
Value Range
Disable, Enable
T38 FAX UDPTL Redundancy count for T.30 messages
Specifies the redundancy count for T.30 messages when using the T.38 protocol.
196 PC Programming Manual