System Control-Moh; System Control-Moh-Install - Panasonic kx-ns500 Pc Programming Manual

5.2 System Control—MOH
5.2.1 System Control—MOH—Install
Sound files on the programmer's PC can be installed to each PBX for use as Music on Hold (MOH).
This screen can be accessed only in On-line mode.
1.
Click Browse and select a WAV file to install as an MOH file. Only one file may be installed at a time.
2.
As uploading the file to the PBX may require some time, a time can be set in Time Set.
3.
In BGM No., specify which BGM number the MOH file will occupy.
4.
Click Execute to confirm the settings. If "Now" is set for Time Set, the installation will begin at this time.
Note
•
Only WAV files can be installed, and file names must not exceed 57 characters in length (including the
file extension ".wav"). Only use ASCII characters in file names.
•
Files may not be larger than 40 MB in size.
•
User (User) level accounts cannot perform this procedure.
•
A WAV file is pre-installed as BGM 1. When a new WAV file is installed to BGM 1, the pre-installed file
will be overwritten. If you need the pre-installed file in the future, backup the file before installing a new
file. For details, see 5.2.3 System Control—MOH—Status / Backup.
5.2.1 System Control—MOH—Install
PC Programming Manual 71