Pbx Configuration-[10-1] Co & Incoming Call-Co Line Settings - Panasonic kx-ns500 Pc Programming Manual

18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
18.1 PBX Configuration—[10-1] CO & Incoming
Call—CO Line Settings
Trunks can be assigned a name, and grouped into a maximum of 64 trunk groups.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Card Type
Indicates the type of card to which the trunk is connected (reference only).
Value Range
Card type
CO Name
Specifies the trunk name which is shown on the extension's display when receiving a call from the trunk.
Value Range
Max. 20 characters
Feature Guide References
2.21.4 Display Information
Trunk Group Number
Specifies the trunk group number to which the trunk belongs.
When a V-IPGW card is installed, the value is automatically set to "7" for the corresponding trunks.
Value Range
1–64
Feature Guide References
5.1.2 Group
710 PC Programming Manual