Panasonic kx-ns500 Pc Programming Manual page 323

VM(DPT): For connecting a Panasonic VPS through DPT Integration
PC Console: For connecting a PC Console (A maximum of 8 PC Consoles can be connected to the PBX.)
Feature Guide References
2.28.1 Voice Mail (VM) Group
2.26.1 Computer Telephony Integration (CTI)
DPT Type—Location No.
Specifies the location number of the connected DSS Console or PC Console. This setting is only available
when DPT Type—Type on this screen is set to DSS or PC Console.
Note that, depending on system traffic, there may be a limit to the number of PC Consoles that can be supported
by a single DLC/DHLC card.
When changing the location number of a DSS Console for which one or more SDN buttons are set, all SDN
buttons customised for that device will be deleted. When you attempt to apply the new settings, a warning
message is displayed showing the slot and port number for which SDN buttons will be deleted. If you do not
wish to delete SDN buttons for this port, click Cancel.
Value Range
1-8
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
DPT Type—VM Unit No.
Selects the unit number of the connected VPS. This setting is only available when DPT Type—Type on this
screen is set to VM(DPT).
Value Range
1-2
Feature Guide References
2.28.1 Voice Mail (VM) Group
DPT Type—VM Port No.
Specifies the VM port number for the port. This setting is only available when DPT Type—Type on this screen
is set to VM(DPT).
Value Range
1-12
Feature Guide References
2.28.1 Voice Mail (VM) Group
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
PC Programming Manual 323