Panasonic kx-ns500 Pc Programming Manual page 407

Feature Guide References
2.7.5 Walking COS
2.7.6 Verification Code Entry
2.24.1 Extension Personal Identification Number (PIN)
External Sensor—Ring Duration (s)
Specifies the length of time that the PBX waits for the called party to answer before cancelling a sensor call.
Value Range
10 ´ n (n=1–15) s
Feature Guide References
2.18.3 External Sensor
Incoming Call Inter-digit Timer—DDI / DID (s)
Specifies the length of time between digits when receiving a DDI/DID number from a public network. The call
will be redirected to a PBX operator when this timer expires.
Value Range
0–30 s
PC Programming Manual References
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Incoming Call Inter-digit Timer—TIE (s)
Specifies the length of time between digits when receiving a dialled number from a TIE line. The call will be
redirected to a PBX operator when this timer expires.
Value Range
3–30 s
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table
Feature Guide References
4.3.1 TIE Line Service
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 407