Panasonic kx-ns500 Pc Programming Manual page 496

11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
Feature Guide References
2.19.1 Caller ID
Dialling Plan Table
Specifies the table to be used for en-bloc dialling.
Value Range
1–4
PC Programming Manual References
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
Tone Detection
Group Name
Specifies the name of the trunk group for programming reference.
Value Range
Max. 20 characters
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
DISA Tone Detection—Silence
Enables the disconnection of a DISA-originated trunk-to-trunk call by silence detection.
Value Range
Disable, Enable
PC Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Feature Guide References
2.16.1 Direct Inward System Access (DISA)
DISA Tone Detection—Continuous
Enables the disconnection of a DISA-originated trunk-to-trunk call by continuous signal detection.
Value Range
Disable, Enable
496 PC Programming Manual